For Sale

Here I have an engine for sale, I guess I’ll call it a “Scratch and Dent Sale. The only thing used/damaged here is the case is chipped at the top. I had my pipe mounted there when the case was built and on my bike, when my bike was in an accident the pipe mount cracked the case. I took all my other engine parts out and ported another case for them for my bike, because it’s a show bike. Everything else is new, so I guess you can call it refurbished. Has a brand new balanced crank, new NTN bearings, new RDM Clutch plate, Clutch pads are floated, new reed ported cylinder and 6mm tapped reed, case ported nicely as well. Has the works… SHA Carb and MZ65 PIPE you should see 48-50MPH out of this motor. The only blemish is the crack on the...

Dax 70cc. Nice looking bike, I think. PM me

Hey, my old roommate is selling his Flying Horse 66cc InFrame Motor Kit. He's hard up for cash right now with some major medical bills, and is selling it for only 125$, shipping included. If you are LOCAL (Able to get to Boise Idaho to pick it up) there would be no shipping and it would only cost 100$. If shipping is over 25$ for a nonlocal buyer, we're just going to cover anything over that to keep the total price at 125$. It's got an Anglefire Head installed and included is a Standard Head with gasket. All sales documentation are included, so you know how old the kit is, when it was bought and what the original price was. The box has only been opened to inspect the product upon it's initial delivery. This has not been...

Hey, I have a small 50cc 2-stroke china pocket bike engine to sell. the engine has built in electric start, rotating venturi carb, it runs excellent with great response, it has a red shell for internal cooling. it comes with stock exhaust box and with extra motorcycle design pipe to extendoff of it.it has centrifugal clutch system to a mini transmission to a sprocket for (#35 chain, yes that's small.) the pull starter is broken and will have to be replaced. shipping can be arranged. payment would be through paypal or cash. i dont have pic's at this moment but will be putting some on tomorrow. the engine is sold AS/IS. PM me if interested. thanks, jon

Tanaka Pure Fire PF-4000 Engine, 39.8 cc 2.2 hp two cycle engine. Uses 50:1 oil ratio. This is a great new engine. I purchased it new on a Staton friction drive with a 1 1/8 diameter drive wheel. I used it for about ½ hour and approximately ½ tank of gas. It has lots of power (will cruise at 18-19 mph at ¼ throttle), is very smooth and is easy to start. The only problem I have is that it is more noisy than my 4 cycle Honda GX 35 engine. I guess that I am spoiled by the quiet operation for the Honda. Since most of my use is in residential neighborhoods the noise level is important to me. I have priced the engine for quick sale so that I can replace it with another Honda GX 35. The price for this engine at Staton-Inc. com is...

Well, I didnt get any serious offers here, time to let it go,...lost my job,...so clearing out the garage. This is a NEW EZ Motorbike Silent Drive MANUAL CLUTCH kit. The manual clutch kits are very difficult to find. Its eBay item number 270692811991 for those who have an interest. Brian

I am selling my gently used GEBE Tanaka PF3300 kit. Will sell complete or as individual components. Asking $350 for the complete kit less the kill switch ( it became dysfunctional shortly after purchase).

I have a set of New MAXXIS Hookworm tires 26 x 2.50 that I will sell for $50. shipped in the USA 48 States only. USPO money order is fine. Thank you, Joe Pierson Kerman Ca. USA

I have two semi complete GEBE kits for sale. Let me explain the semi part first. The two kits that I have were originally a 40cc Tanaka kit AND a 26cc tanka kit. I'm keeping the 40cc tanaka engine which I will use on a different kit. The parts from the two combined kits are--------Tanaka 26cc engine and the smaller clutch housing, bigger clutch housing for the bigger tanaka and other big clutch engines , one engine mount, another engine mount that has been butchered:oops: for frame monting instead of axel mounting, two HTD driven rings[one is on the heavy duty rear wheel] and install tool, three HTD drive gears [2 12tooth & a 14tooth highway gear]. One heavy duty 105g[12 gauge] velocity rear wheel with solid axel, two throttle...

For Sale: Brand new, 0 miles, one S6-S Morini Italian scooter engines in stock. Comes with a Dell Ortto carburetor and exhaust spigot fitting. No exhaust system, you will need to fabricate your own. headpipe/expansion chamber and muffler. $600.00 Those interested should leave me a PM here. BBB

Here is the King of Beach Cruisers up for sale. I've had my fun with it. Somebody's gonna get a great Bike. Firm at $750.00. Less than you could build it for. I don't want to ship it so come to San Diego & ride it home. I'll guarantee you make it home within 400 miles, or I'll come get your dead cactus off the road.... I would consider parting the wheel set for $500.00 Internal Nexus 7 speed rear with Hydro disk brake, front with hydro disk too.

For sale is my motorised mountainbike. Bike has brand new motor still needs to be run in has had two hours running time starts no trouble runs well . New brakes tyers and seat . Comes with lights for night rides . Good reliable bike to get you travelling . pictures are below $650 . contact glen 0450348245 i am located in sydney australia if you are overseas and would like to buy the bike i can arrange to have it shipped for at buyers expence.Cheers:helmet: Ps i am fairly new to this site i have pictuers of the bike i am having a little trouble finding out how to paste the pictures hear if you would like a picture i am contact able via email ozbargains@yahoo.com.au post me a note i will gladly send you a pic !

I have a 2005 GruBee 48cc round-head "Wing Ding II (also called Pico 50) engine (only) on eBay right now. This is from an unused kit that has been sitting on the shelf for four years. We're selling the engine from the kit because we're using the other parts from the kit for a four-stroke project. The engine comes with the carburetor, mount extenders and extra spark plug. If you have an HT that's on its last legs, here's a great replacement engine. I have one of these on my '80 Western Flyer, and it's a strong runner. Here's the link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160361192876&ssPageName=STRK:MESELX:IT

This bike started out a Felt V12 cruiser. The bikes frame has also been converted into a full function gas tank (about a half gallon) with a hand fabricated gas cap, filler neck and petcock. The drivetrain of the bike is fully hopped up 66cc Grubee as well with a ported cylinder, lightweight piston, expansion chamber exhaust, high comp. angle fire head and custom motor mounts . The bike runs great and is a must see. The color is Raw steel with a high gloss clear coat so you can see all the awesome welds...this bike is show/magazine quality and will not dissapoint. The bicycle was 100% Brand New when converted into a Motorized bike so it is in perfect condition. This bike was only built a few months ago as one of my last projects. I...

I have some new Subaru EH035 engines for sale. These engines were still packed in their sealed carton from Subaru which I personally opened. They came from a company that had gone out of business. I only wanted a few engines for myself, but I ended up purchasing the entire lot. These engines do not come with fuel tanks. The original intended application for them was for a product that used a separately mounted tank. The engines come with an owner's manual and plug wrench as shown. You can find additional information on the Subaru EH035 engine at the Subaru website: http://www.subarupower.com/pfeatures.aspx?pid=49 I am offering these engines for $145 each. Shipping via FedEx Ground (about the cheapest and fairly...

120$ kit+ 120$ bike+ 60$adapter =300$ 25$ labor. Pickup only one black engine and one is a silver engine same bike.

This bike features 21 Gas Powered Gears, thanks to the Sick Bike Parts Jack Shaft Kit. It has a 66cc Flying Horse Motor. The frame is a full suspension GT LTS. All of the "Gas Bike" components are brand new, with the frame being lightly used. Going to run this as an auction for 24 hours after the reserve is met, or until the buyout is reached. Reserve is $2,500.00 USD. Buyout is $3,500.00 USD. Seller pays shipping. I accept paypal for payment. Any questions or comments are welcome. http://www.gasbikeproject.com

The frame has broken way too many times and I'm so over this thing. I'm gonna try a new bike altogether but before I literally throw this thing in the trash, I was wondering if anyone wanted my disc brake setup. I'll post pics if there's interest. The forks are flat-black, it's a "Panama Jack" bike, and has the stupid bottle-opener on the forks. I'm not sure what I'm doing for a bike yet so I doubt this is gonna happen tomorrow but who knows with me. I'll prolly sell them for $50+ship with the brake caliper and disc. Supply your own wheel.

FOR SALE Hey guys I've got a zeda100 firestorm and a WC85 expansion chamber that goes with it and it's never been started. I've got it mounted on the bike but that's as far as I've got. It's got Duluth cycle black decals on the covers and the white out line you see on the clutch cover the outline CFH "COWBOYS FROM HELL"You can take it off if you with and if you so happen to been a Pantera fan leave it I've also got the firestorm decal that come with it. I bought it as a kit but got it scattered to hell and back so I can guarantee it will all be there if whomever would like to purchase it if you could make a list of what's in the kit I could make sure it's in the package. I'm new to all of this and I'm not as familiar with it. Price...

Bike and engine less than 100 miles. The friend I built it for is having health issues. I am hoping to get around $600 if possible for him. Thanks.