Schwinn Point Beach

bmoody

Member
Local time
1:02 PM
Joined
May 28, 2008
Messages
61
Just picked up a point beach last night and returned the junk avalon bike I had bought.

Got the 80cc motor paid for and being shipped. Cant wait to get the two together.

Look forward to sharing the progress along the way.
 
I got mine too...

I just got home with my Point Beach. Good points, nice finish, looks like good welds, and very light. Unhappy with the brake cables etc... Cheap. But the last bike I bought was a 1973 Suburban. MUCH difference in quality.
 
Are the cables on your point beach about a 6" too long?

They stick way the heck out on mine.
 
I built a Point Beach last fall with a Power King. I chose the point beach because it was one good looking cruiser. As you may know, the bottom motor mount clamp won't work because the frame is too big. I ended up using the "FRAME SAVER" that can be found on eBay. I can't recommend this product enough- it made life much easier.

So far, I'm pretty happy with the bike. Only problem so far was the rear hub had to be replaced...supposedly this is a common issue on Schwinn's.

And yes, the cables stick out a bit. A couple zip ties should clean that up a bit.
 
I'm just going to pick up the metal at the hardware shop and weld one together.
 
Motoschwinn-

No, I did not use the large case adapter on my Point Beach. It was the standard size (smaller) mount, which is why I needed the "Frame Saver." If anyone is interested I can find the seller's ebay username.

The bike was a dorm room build, so this option was better than going the fabrication route for me.
 
Back
Top