I LOSS my needle lock clip .

[badmoon]

I want to know if its possible to find it at a NAPA store or other one for this needle .Its for my 80cc king HT .

 

[BSA]

Yes, you need a C-clip (circlip). I'd just take the needle to the shop and check some to see which one works.

BSA

 

[wayde]

if you can't find one i'll mail you one no cost i have a few laying around

 

[badmoon]

so it will be easy to find it ?

 

[Skyliner70cc]

Nope, won't be easy to find it. I don't remember where, but about 10 years ago I bought a variety "sampler" of e-clips of almost every size. They sure have come in handy over the years.

Here's a tip: Solder a miniature washer onto the top of the needle clip and slide other washers onto the needle clip to adjust height. The washers I use are from a repair parts kit to repair roller mechanisms in cassette tape and VCR recorders. if you got a cassette player, you can always tear one apart for eclips and washers. No one uses those anymore anyway

 

[Mountainman]

Small engine repair shop might have a clip. Napa store -- worth a shot. Happy Riding from - Mountainman

 

[kaploink]

They have an assortment of 300 e-clips for $3.99 at harbor freight, though I am uncertain if it has the correct size needed for the carbs.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=4300

 

[Skyliner70cc]

They have an assortment of 300 e-clips for $3.99 at harbor freight, though I am uncertain if it has the correct size needed for the carbs.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=4300

Cool, I bought my box of e-clips at an electronics store if I recall correctly. Are HF's eclips small enough to work?

 

[butch27]

Go to any Autozone type store and look in the "HELP" parts (Brand Name) they have packs of different sizes.

 

[kaploink]

Cool, I bought my box of e-clips at an electronics store if I recall correctly. Are HF's eclips small enough to work?

I am not sure. I only saw them online. I haven't been to harbor freight in person to check them out yet.