34 Tooth Sprocket RPM's?

The issue shouldn't be you, its with USPS and local post (I'm from australia). I've already emailed you.

Although if I dont receive this week I'll PM you for one last verification before an insurance claim is filed.
 
I'm very surprised to hear someones MPG actually went down. I hope this is not the case for me. I'm expecting a substantial increase MPG. I've got the 28 tooth on the wheel, I just need to mount the motor, and cut the chain (no going back after that). I might even have it running tomorrow if the wife will leave me alone.
 
andy- yes it was me. It arrived finally. You shouldn't advertise 48 hour manufacturing if you cannot deliver that consistently. The sprocket seems sound. Also- if there was a manufacturing delay (servo assembly for your hobbing machine) as you say, it is your responsibility to inform the customer of the delay- I was not happy about the "i don't know for sure" and the "let me look into that" or your operation. If I didn't raise those questions, they certainly weren't going to be considered.
 
should my 48cc be able to power a 36 tooth sprocket ??

o am hitting 25mph right now, should i get 30mph or so with the 36tooth.

Andy I live in the states, and hopefully my delivery times will be way better than the other guys..

how much are 36tooth sprockets from you ?
 
HI lildeezul,

I am not too familiar with the power output of the 48CC engines so it would be hard for me to say how well it would do pulling a taller (smaller sprocket)....Maybe somebody with a similar sized engine and smaller sprocket can chime in with their findings?

On a 26 inch wheel, each tooth you lose off the sprocket will gain you approximately 1 MPH additional top end assuming the engine can pull it to the same RPM as before...I have a Dax 70 on a mountain bike running a 36T sprocket and can go to 34.4 MPH at 6400 RPM (I would NOT recommend that high an RPM because the engine starts making funny noises)...30 MPH or below keeps the revs OK in my opinion....I am thinking of putting on a smaller sprocket on my bike when I get a chance...

36T plain (non-anodized) sprockets delivered in the USA are $50 ($37.50 for the sprocket plus $12.50 Shipping for up to 5 sprockets)...You may be able to save some money if you can use a 34T (our best sellers) because on eBay auctions they typically go for less....

As far as delivery times, over 99% of our sprockets go out within 48 Hours after payment is received (assuming I have all the needed info and don't have to email or phone for it)....Current average is 41 Hours....BUT things can happen occasionally and we are working on better ways of catching potential problems before they happen and hopefully better follow-ups too.

Hope this helps you and thanks to all for your past, present and future business...

Andrew
 
oh yeah i seen your ebay auctions.
it has a very big long description.
I actually thought about buying from there on ebay, but then i seen u on the forum, and to my suprise you all are the same people.
lol
 
has anyone used a 36T on a 48cc?????????????????????????????????
I personally think it would be a bit to much for a 48,, but I have never tried it.
 
andy- yes it was me. It arrived finally. You shouldn't advertise 48 hour manufacturing if you cannot deliver that consistently. The sprocket seems sound. Also- if there was a manufacturing delay (servo assembly for your hobbing machine) as you say, it is your responsibility to inform the customer of the delay- I was not happy about the "i don't know for sure" and the "let me look into that" or your operation. If I didn't raise those questions, they certainly weren't going to be considered.

You too huh...lol
Mine was shipped last week Monday UPS, should have been here last week Thurs or Friday at the latest. So this is Monday and still no sprocket.
It sure doesn't make for positive Ebay Feedback, so far no feedback, still waiting, sure took the paypal money in a hurry...lol
 
HI Boomer,

As far as I know all of our current orders have been processed and shipped out....Please email me or PM as much pertinent info as you have and I will research ASAP (name, address, approximate order date, eBay item # if applicable, Pay Pal name etc).

Thanks!
Andrew

PS - If it had already been shipped (which it may have per you notes above) I can get you a tracking number if needed....UPS is generally pretty quick...
 
Back
Top