Broken Gas Cap

Molotov256

Member
Local time
5:12 PM
Joined
Nov 6, 2008
Messages
139
Location
St. Louis, MO
The gas cap on one of my generic brand chinese engine kits broke - the little tabs fell inside the cap and don't protrude anymore, so the cap doesn't snug down like it needs to.

Any suggestions as to where to find a replacement?
 
Good call on the sponsors... I found one from thatsdax.com. Shipping seems like a rip and a half, though... $9.00 to ship a gas cap?! :sick:
 
Assisted Bikes.
You can make a rubber gasket yourself,but unless it's fuel resistant it's going to soften & warp & eventually won't seal.
If it was cost-effective i would buy Pablo's.
With my caps i drill a small pilot breather hole in the top of the cap,but if u buy from SBP's ask their advice cos they don't say anything about a pilot hole in their instructions.
 
I used a filler neck and cap off an old yardman riding mower,cut the neck off the plastic tank,put some oil and gas resistant glue on tank neck and slowlly screwed it down on the tank filler neck...worked perfect and no more leaks...Phat
p.s.
also it's already vented;see my FrankenraTT post for a pic
 
$9 is nothing,i payed $23 for shipping from gasbike for a carb and intake=total price$38
$12 new style carb,$3 intake,$23 fedex shipping,but i get my stuff in 4-5 days.
everyone else wanted $20 - $30 for the carb plus $10 shipping or they didnt take a credit card or they wanted paypal.
 
Last edited:
Back
Top