got er running but two huge problems

[skjjoe]

use silicone around the intake the put your carb on
seal it up good .If that doesn't fix it then while the bike is running spray some wd40 around the motor when it bogs down you've found your leak

 

[fetor56]

If yours is a 2-stroke HT try these suggstions:
http://www.motoredbikes.com/showthread.php?t=8109
http://www.motoredbikes.com/showthread.php?t=4976

 

[ENO]

Raid the Muffler Men bins

Hey Kraash..ENO (Down Under)..If you find your local Muffler shop and check out their bins after they close youll find all the sizes of off cut good quality pipping youll need to add on to the exhaust..The longer it is the different the tone..If you be nice the Muffler man will probably do a quick weld for you for nothing if you let him admire the bike or even tease h with an offer of a ride to hear how it sounds after his magnificent weld job..Remember compliment his skills, you never know when you get a new exhaust and muffler he can extend the piping to show you how skilled he is..Ride safe and good luck ENO in Oz....PS..Have added a pic of the extension pipe (free) and another of the scrap we found that we might try on to check out the sound..Dont laugh it might work..There are other strange exhaust fitting my son added on my ALBUM..Good luck scrounging those bins in the dark.

 

[insomniacshotrods]

Heck dont worry about the broken tube,it will run better without it i cut mine off anyway. Open up the air cleaner with a dremel tool to get air straight into carb,and richen up the setting say 3rd slot to start with ,hammer the muffler end back round to fit and red locktite the **** out of the bolt. As far as the carb intake leaking air i used some heat shrink tubing on the intake and then slid on the carb worked great. Make sure you locktite all bolts on bike or you will be sorry like with the muffler.

 

[cabinfever1977]

dont worry about the pipe thing.
use a o-ring in the carb to intake and some silicone on the intake.

 

[kraash]

thanks all for the help.. i ended up useing an o ring from auto zone and mashed in on tight.. i think its working great cause i had to adjust the idle and when i choke it now it stalls.. =) ..

 

[fetor56]

thanks all for the help.. i ended up useing an o ring from auto zone and mashed in on tight.. i think its working great cause i had to adjust the idle and when i choke it now it stalls.. =) ..

Can't get much better than that......problem solved.