Cylinder base gasket

[210061741]

Pablo

Nice share thanks for that.

I wish i had a small punch set cause that would make it much easier to make theese.

 

[GearNut]

Budget small punch set:
Aluminum or copper or whatever metal you can get tubing of appropriate size. (I have used many, IE :the threaded tube out of table lamps to metal bodied ball point pens) Sharpen the outer edge of one end and enjoy.

 

[Al.Fisherman]

Budget small punch set:
Aluminum or copper or whatever metal you can get tubing of appropriate size. (I have used many, IE :the threaded tube out of table lamps to metal bodied ball point pens) Sharpen the outer edge of one end and enjoy.

You know it. Made many a punch. Lay material on a piece of wood and strike.

Although I don't need one yet, I decided to make a hole punch before I need one. A 9mm shell casing will work for 8mm studs. I made one out of some stainless tubing.

9 punches... $12.00 3/32 to 1/2"

http://shop.ebay.com/i.html?_nkw=ga...270.l1313&_sop=15&_odkw=drill+press&_osacat=0

 

[machiasmort]

Would have never thought of a 9mm casing, great tip!!!