For Sale..Clutch roller bracket for HT

I know that there are many out there that can make these on their own. This is for those that can't for what ever the reason.

This is a bolt on mod. This roller bracket will enable the rider to disengage the clutch with minimal effort. Once installed, the clutch can be disengaged with one (1) finger, the pinkie at that. On my bike I can disengage the clutch using 6# test mono fishing line.

These come with a 100% satisfaction guarentee...all you have to say is I want my money back...PERIOD..that is how good these are.

These are hand made by me. I use 3/4" angle iron, steel ball bearing roller, and grade 8.8 mounting hardware. Painted to either Silver, or Black. The only part that is not included in this mod is the cable case holder, which you will use from your own engine. $14.95 plus actual postage.

Shipping will generally be within 24 hours. If for any reason a longer time is needed you will be notified BEFORE payment.

Photos are as follows.. 1.The cable roller bracket itself 2.the original instillation and 3. the installed modification.

Thank You
Ronald V. Becker
Calera, Alabama USA
 

Attachments

  • Roller.JPG
    Roller.JPG
    70.2 KB · Views: 961
  • Original.jpg
    Original.jpg
    56.2 KB · Views: 891
  • Installed.jpg
    Installed.jpg
    100.5 KB · Views: 1,726
roller bracket for ht

Fine.. do what you want to do. There are members on here that for a number of reasons can't make one...or other mods for that matter. No one has offered these and why should a member that wants one be penalized. I'm charging very little as compared to what it takes to make them. Not counting material, I spend about 30 minutes to a hour on each one to it's finished state. I fought with my clutch. Made one myself, thought they were one of the BEST inexpensive mods that did most for the rider (not the bike). You know how it works, I'm sure you are pleased with which it makes operating the clutch so easy...why would one not want it for other riders.

If Large Flipinos is in fact the original designer, I give him FULL CREDIT for such a great mod..believe me I do. Say you don't either have the ability or the tools to make one, should you have to go without?

Just got back from the Post Office and while driving I thought about something.... I think you need to get your nose out of my business. You know the ole saying... if you can't say anything good don't say anything.

Well said AL...if anyone wants to complain it should be Large. I doubt that many in this forum would complain in the same circumstances. Keep up the good work Al. I use centrifugal clutches on all my bikes or you'd be making 4 more this weekend.
 
Fine.. do what you want to do. There are members on here that for a number of reasons can't make one...or other mods for that matter. No one has offered these and why should a member that wants one be penalized. I'm charging very little as compared to what it takes to make them. Not counting material, I spend about 30 minutes to a hour on each one to it's finished state. I fought with my clutch. Made one myself, thought they were one of the BEST inexpensive mods that did most for the rider (not the bike). You know how it works, I'm sure you are pleased with which it makes operating the clutch so easy...why would one not want it for other riders.

If Large Flipinos is in fact the original designer, I give him FULL CREDIT for such a great mod..believe me I do. Say you don't either have the ability or the tools to make one, should you have to go without?

Just got back from the Post Office and while driving I thought about something.... I think you need to get your nose out of my business. You know the ole saying... if you can't say anything good don't say anything.

By putting this post on the forum "you" made it anyone's business to put their nose in. No one said you couldn't make these , i just explained why i don't.
 
Fine.. do what you want to do. There are members on here that for a number of reasons can't make one...or other mods for that matter. No one has offered these and why should a member that wants one be penalized. I'm charging very little as compared to what it takes to make them. Not counting material, I spend about 30 minutes to a hour on each one to it's finished state. I fought with my clutch. Made one myself, thought they were one of the BEST inexpensive mods that did most for the rider (not the bike). You know how it works, I'm sure you are pleased with which it makes operating the clutch so easy...why would one not want it for other riders.

If Large Flipinos is in fact the original designer, I give him FULL CREDIT for such a great mod..believe me I do. Say you don't either have the ability or the tools to make one, should you have to go without?

Just got back from the Post Office and while driving I thought about something.... I think you need to get your nose out of my business. You know the ole saying... if you can't say anything good don't say anything.

is it patented??? If not the it doesn't make much difference what large philipino, or anyone else thinks...

Large... if you came up with this design... props man. This is a good is a good idea.
 
I got one of these rollers on my bike and I love it.... should come standard issue with the kit from china.
 
I would say 6 before and 2 after... I love this mod. Highly recommended... definitely worth the money.
 
Hello Ron, just chatted to someone else with a tight clutch who could do with this mod, along with the pivot cam grinding, so I figured I'd bump the thread to ensure it stays where it can be seen.
Nothing important to say.
... Steve
 
I must say, we thought about making and selling such a thing in 2008, but didn't want to step on Large's toes. While Large had the early concepts, Al.fisherman executed. I think the last little while has seen the gloves come off.

Anyway, I still love the concept.
 
Back
Top