Ebay: 2 Stroke MOTOR NEW ~ For Gocart , Pushbike or RC Boat rear mount. looks cool.

Last edited:
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
It actually appears to be a belt reduction, and not a CVT, HV. Also, there has to be a gearbox between the engine and the drive pulley. The drive sprocket rotation would be backwards otherwise. (And, the output sprocket would be spinning way too fast)
 
It actually appears to be a belt reduction, and not a CVT, HV. Also, there has to be a gearbox between the engine and the drive pulley. The drive sprocket rotation would be backwards otherwise. (And, the output sprocket would be spinning way too fast)

Good eye there, Lou. You think there's room in there for a tranny too huh?
bike motor 004.jpg
 
It actually appears to be a belt reduction, and not a CVT, HV. Also, there has to be a gearbox between the engine and the drive pulley. The drive sprocket rotation would be backwards otherwise. (And, the output sprocket would be spinning way too fast)

so the motor wouldnt be ideal for a bike?
the seller told me this when i asked how fast it would go on a bike
"The fellar with the bike pics got his and his sons bike/motor up to 50 Klm"
 
There has to be a gearbox that reverses rotation between the engine and the drive pulley, else the bike would be going backwards! I suspect one of the 3/4/5:1 pocket bike gearboxes. (similar to the pic below) They don't take up much space, and the pulley could be mounted directly on the output shaft.
 

Attachments

  • PTTransmission_500.jpg
    PTTransmission_500.jpg
    9.4 KB · Views: 182
  • SCTX301875-2.jpg
    SCTX301875-2.jpg
    47.7 KB · Views: 201
Last edited:
Back
Top