retromike3
Member
- Local time
- 4:58 AM
- Joined
- Nov 23, 2008
- Messages
- 409
I have had two engines brake at the rear mount. The second one I thought I fixed with grade 8 bolts but then the casing broke I was hoping I could make something that I could weld to the bike frame to make it stable. I think the problem I had at first was that the bolts I used were two long(I was lengthening the rear bolts so I could get the chain the right length).I think this caused too much vibration and wound up braking my block at the mounts.
mike
mike