fast cruiser

26 inch cruiser grubee 66cc 2stroke..sbp expansion pipe..sbp high flow filter.. 36 tooth rear sprocket.. soon to be a 27 tooth from andy inchville.. and a set of ape hangers for a ratty look
im hitting about 32mpg now but with the 27 tooth i should be able to put less stress o my motor with a top speed around 40mph
 
Last edited:
I have a cruiser build and thought that a smaller tooth sprocket was the real deal, while it may go a bit faster it sucks on hills where i need power. Good luck with your ideas
 
I have a cruiser build and thought that a smaller tooth sprocket was the real deal, while it may go a bit faster it sucks on hills where i need power. Good luck with your ideas

heres my craigslist ad for it forsale.. and yes u are right it has less power on the hills but when u have an expansion pipe and a high flow filter u have a little more than twice the stock horse power.. so getting up to that speed is not an issue..

http://tucson.craigslist.org/bik/1981853978.html
 
Nice build, but you did not add a price for it .

Your frame is about the same as my cruiser build as you can see in the pic .
 

Attachments

  • IMG_1001.jpg
    IMG_1001.jpg
    115.5 KB · Views: 363
heres my craigslist ad for it forsale.. and yes u are right it has less power on the hills but when u have an expansion pipe and a high flow filter u have a little more than twice the stock horse power.. so getting up to that speed is not an issue..

Doesn't add twice the power. I have SPB pipe, filter, boost bottle, did porting, and got a carb. I have a 36 tooth sprocket and wouldn't want to do any less then 32 teeth.

You can try a 27, but I wouldn't recomend it unless you live is Saskatchewan or something.
 
Doesn't add twice the power. I have SPB pipe, filter, boost bottle, did porting, and got a carb. I have a 36 tooth sprocket and wouldn't want to do any less then 32 teeth.

You can try a 27, but I wouldn't recomend it unless you live is Saskatchewan or something.

ok well im not sure of wat kind of calculations uve made but i started with a motor from grubee skyhawk motor stock kit with .476 horsepower and now i have 1.026 horsepower and yes u lose torque when u have less teeth in ur rear sprocket but ur gain in horsepower makes up for it if u really want to go down to the numbers u are adding around .8 mph for every tooth u drop but ur right u must also watch ur torque but if ur motor if tunned right u can get alot out of it.. you mentioned u have a 36 tooth.. i bet ur not even hitting 35mph
 
Nice build, but you did not add a price for it .

Your frame is about the same as my cruiser build as you can see in the pic .

i didnt add a price but i did already sell it for 350 and i have a micargi set up now
 
Back
Top