cam problem

drebinpk

New Member
Local time
7:30 PM
Joined
Oct 5, 2010
Messages
11
ok so i meant to take my gear box off cause the thing is junked but accidently took too much off(the crank case cover) and well came gear and all kinds of valve train fell out problem is i have no idea how it goes back in.... can anyone help me?
 
I would put it in how you think it should go in, then slowly pull the starter to make sure everything is workin fine.
 
The only issue you need to concern yourself with is........ The timing marks on the cam & crankshaft. It is next to impossible to see the marks without removing the opposite cover. If assembled wrong the valves may contact the piston and bend many parts...

You can call me and I will try to guide you through the process.

252-475-0406

Have fun,
 
I would put it in how you think it should go in, then slowly pull the starter to make sure everything is workin fine.

You could be one or two teeth off and it will pull over fine, just won't run.



If assembled wrong the valves may contact the piston and bend many parts...


If its a Honda that is impossible.
 
Last edited:
Back
Top