4 stroke engine with same start as HT

[oldnube]

Do they make a 4 cycle motor that mounts like the 2 cycle 66 cc and starts the same way? Where can i find one ?

 

[bideronit13]

There's a huge amount of machine shop owners around here. I read last night this guy came up with a new motor mount and I cant find the post.
So just search around.

 

[oldnube]

non pull start

My main concern is an engine, 4 cycle that mounts in the "v" that starts by peddleing to about 5 mph engage clutch and it starts.

 

[MotorBicycleRacing]

My main concern is an engine, 4 cycle that mounts in the "v" that starts by peddleing to about 5 mph engage clutch and it starts.

There isn't any 4 stroke kit on the market like the 2 stroke kit.

Whizzers can be pedal started but you can't buy a kit.

How much are you willing to spend on a 4 stroke kit?

 

[bideronit13]

Check out sickbikeparts.com and read about the stuff there. Thats what I have is a Beach Cruiser and a Honda.
I just got my Tom Tom one 130s GPS unit and it has bike routes in 3D and speedometer. I got it at ebay for $45 new in box.
I had to update as you said V-frame. I also have a V frame that is a Giant Mountainbike that I was going to use but after going to Sick bike parts I couldnt resist.
I got your message oldnube. I trying to figure out how to do that now.

 

[bideronit13]

Oh and about the stage 3 tranny engadge You can just jamm the thing to engadge then JB weld it because the clutch system alone works fine. You can come to a stop and the Motor will purr. I learned this stuff from discusion boards too. Other people were on the topic about it.
The stage 3 tranny comes with a cable setup thats junk you can toss the cable out and not ever have to replace it this way.