I suffered a twisted off exhaust bolt, while removing 2nd bolt it to twisted off. ANY IDEAS on how to fix it? PLEASE EMAIL ME I'm not to good at this forum thing. shurt55@gmail.com
The bolts are most likely 5 MM. If you can manage to get the remaining out via a drll, etc, and mess up the treads, simply use a 6 MM tap and install larger 6 MM bolts.
Did not get your email Al.Fisherman. Please try again.
In the mean i'll try the 6mm tap. If necessary, where can I get the healycores?
Thanks for all your replies. any other ideas please email, I check often.
I would try to tap to 6 MM before you purchase a 5 MM helicoil kit[$35.00 to $50.00]. The reason is two-fold, first is cost as a tap is usually under $5.00, and the helicoil will need to use a lot more of the metal between the port and exhaust bolt holes.
whether you have success or failure, you write a follow up here, on this thread, detailing what the problem was and whether it has been resolved. otherwise, whats the point of having a forum board in the first place?!?!?
healy cores...thats someone whose never purchased one
whether you have success or failure, you write a follow up here, on this thread, detailing what the problem was and whether it has been resolved. otherwise, whats the point of having a forum board in the first place?!?!?
healy cores...thats someone whose never purchased one