Huasheng 31cc 4 stroke

[lianikova]

Who sells this engine in the us, who carries parts?
This has been a great lil engine, but info and suppliers are scarce.
To find one on ebay you might have to buy the pump to which it is attached.

Thanks for all the help.

 

[The_Aleman]

There's several places that sell friction-drive kits with the little Huasheng. Offhand tho, the only major vendor I know of that sells the engine is Dax.

He labels it the "Titan XC35" www.thatsdax.com. He may sell parts for it, you'd have to contact him.

 

[IbedaYank]

Who sells this engine in the us, who carries parts?
This has been a great lil engine, but info and suppliers are scarce.
To find one on ebay you might have to buy the pump to which it is attached.

Thanks for all the help.

take the carb off and bring it to your local small engine shop and see if they can match the gaskets after all its a clone of a honda motor

 

[darwin]

I've looked at that xc35 on dax's site a zillion times visiting his site and always thought that was a 2stroke, dunno what to say!

 

[MotorBicycleRacing]

The Huasheng 31cc sold by DAX is a clone of a Honda GX 31 which they have
not made since they upgraded to the Honda GX 35

Who knows if the honda parts are interchangeable???

Also it uses a pumper diaphragm carb which is nothing like the butterfly carb
on a huasheng 50cc

If you had to pay $170 it would be a much better deal to buy a real Honda GX 35
from Small Engine Warehouse for $225?

If you really want a Honda GX 31 there are a lot of them available on the used
market for cheap. I bought one for $40

Did you try turning the engine over after you took it off the friction drive?

A common mistake is to use too long a bolt and they lock the flywheel.

Hi all have had this engine for about a year now and it ran like a champ
Then it stated to act buggy, hard to start, then it will only start in full throttle. cleaned filter, plug, blew the lines. What do you think?
Diaphragm ? place for parts...?

And for the fun of it I had bought a second engine from ebay new....
Bright and shiny mounted it had to jerry rig the cable and was do proud.
Then wnet to pull it thru, it seems to be wrecked on the inside, had to pull like heck to get it to move an inch..... so off it came, anyone needing a good doorstop?

Any help thanks!

 

[darwin]

Yea on tanakas and the gx35 the engine mounting bolt has to be an exact length. If ita 1/4in too long flywheel gets locked up, 1/4in too short and not enough thread holding the motor on securely. Has to be the exact length to mount for the application......just backing up what motor said cuzz its important.

 

[IbedaYank]

TECH SPECS
4 stroke ohv
1cyl
32cc
1.5hp
2 Nm torque
Air Cooled
CDI ignition
length 212mm
Width 254mm
Height 245mm
Weight 8 lbs
seems to say pretty plainly its a 4stroke

 

[darwin]

Rubbing it in with salt huh yank? LOL admit I do feel a little foolish, never studied that motor mostly just glanced at it.

 

[IbedaYank]

Darwin
no not really as this motor also on his site is a 2stroke 50cc
but reading the discreption does help not that I always do