Clutch How do I remove the clutch for replacement?

[DuctTapedGoat]

Ohhh. Yeah, a chain whip is basically all you need. Good stuff figuring it out!

 

[happycheapskate]

or you could wrap a flathead screwdriver in electrical tape, and jam it in between the gears to stop rotation. Try using a big flathead screwdriver (stubby type short one) and a vice grip on the screwdriver. Push down and turn, now you should have it.

 

[relaxxx]

This is where I'm stuck.

I started getting this bad scraping/rattling sound from my clutch so I'm taking it apart to have a look. My big friction pad plate gear has some play to it, not sure if it's supposed to be like that. I can't get the nut in the smaller hub part off, it moves the drive chain and rear wheel. I'll try to lock up the chain with some wire or something.

I also don't have that extractor thing... What else to expect? Am I even on the right track??

I just uploaded a video of me wiggling the clutch:
http://www.youtube.com/watch?v=OFiMqcnIxiY

 

[Ace2]

This is where I'm stuck.

I started getting this bad scraping/rattling sound from my clutch so I'm taking it apart to have a look. My big friction pad plate gear has some play to it, not sure if it's supposed to be like that. I can't get the nut in the smaller hub part off, it moves the drive chain and rear wheel. I'll try to lock up the chain with some wire or something.

I also don't have that extractor thing... What else to expect? Am I even on the right track??

I just uploaded a video of me wiggling the clutch:

how were you able to wiggle the clutch?