NGK or E3 Spark plug?

[geebt48cc]

Heyy,

So, I've always used NGK B5, B6 plugs on my 66cc with very good luck. I'm hearing now that if you think those NGK's are good, then try the E3 plug. Does anyone know if this is true?

I wonder if the three prong would give you better power with more over-all firing?

Glen

 

[thearcticfisherman]

BR9HS is what i run on my grubee 66,Trust me 3200 miles cant prove me wrong

 

[geebt48cc]

Plug

BR9HS is what i run on my grubee 66,Trust me 3200 miles cant prove me wrong

Wow, I've never heard about the BR9? Uno, that's quite a bit of miles for these little engines. All I've heard of is B5,B6, and B7 NGK. So, can you tell me how you ride in order to be that successful with miles. See, I'm right at 650 original miles, and from what I've read, that's pretty good considering all original.

Uno, if the B9 plug has helped, I'll try to find one today!!!!!!!!!!~


Glen (So, were those miles all with original CDI?) See, I bought Jags new performance CDI to help save bearings.

 

[Fabian]

Doesn't the "R" designation make it a resistor plug and the "9" make it a very cold plug.
Forgive me for not doing my research, but i've found that the projector nose NGK plugs to work quite well. I am currently using an NGK BP6HS - non resistor plug.

 

[geebt48cc]

Fabian, uno there's got to be more to it than just the BR9 NGK plug that your using to get that kind of miles from a "China Wonder?" I believe you Thearc, but that's pretty impressive. Tell me, how did you put those miles on bike? Where? Mix ratio?

Fabian, Yes, higher number cooler plug.........................

 

[timtooth]

I like the E3 as of right now i have them on mybike, lawnmower. I going to try them out in my car next..

 

[geebt48cc]

So, Well, can you tell if it helped with power?????????????????????

Glen

 

[thearcticfisherman]

LOL cool people, the trick,I ride 36 miles round trip 5 days a week lost the top end at 2200 or so miles needle bearing , new top end piston, rings,found a cyl, with a 40mm intake, and chrome slant head, run cns high performance carb, with a big air cleaner the ones that come stock are junk and run a MM hub and sprocket with a 40 tooth, top end is 34.6 mph, gas is 32:1, try a UNI air filter, FUN RIDE!!!have 3318 miles on bottom end, Have a bro that put 4200 plus on his 48CC

 

[timtooth]

yes it help ,there couple of other people on here who testing them out also.
You might want to look on the website E3Sparkplug.com, so you can compare info

 

[thearcticfisherman]

yes br9hs did help on mine mid and high end power