jefuchs
Member
I posted earlier about not being able to turn my motor enough to start it. After reading several posts in the archives here, I tried just about every suggestion. Nothing worked, and I was using an electric drill to turn the motor, as there are no hills to descend in my area, and judging by my results, a mountain would not have been high enough.
Anyway, I did succeed at one thing. I stripped the bolt in the magneto. It's toast, and my new motor still hasn't run.
I'm only a little discouraged, but very frustrated!
Anyway, please look at this link, and tell me if this is what I need to replace it with, or is there a smaller part (just the bolt) I can buy. I'll also ask the seller.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180959347095
I'd ask for advice starting this thing, but you guys have shared all your advice already, and if I hadn't stripped the thing, I'm sure I'd succeed sooner or later.
Thanks.
Anyway, I did succeed at one thing. I stripped the bolt in the magneto. It's toast, and my new motor still hasn't run.
I'm only a little discouraged, but very frustrated!
Anyway, please look at this link, and tell me if this is what I need to replace it with, or is there a smaller part (just the bolt) I can buy. I'll also ask the seller.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180959347095
I'd ask for advice starting this thing, but you guys have shared all your advice already, and if I hadn't stripped the thing, I'm sure I'd succeed sooner or later.
Thanks.
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.