Help with motorized bike parts

[rando24]

Hello im having trouble with some parts that i need to get for my motorized bikes, first my 2 stroke i need the exhaust bolts for the exhaust, where about's can i get them from, thats really all from the 2 stroke its my 4 stroke that's annoying me, i need to get a new clutch and gearbox for it, the other annoying thing is that i use to see lots of them on ebay but not now for some reason i cant find any, so where about's can i get theses parts from.

thanks

 

[darwin]

Ace hardware has any bolt you might need.

 

[dougsr.874]

bicycle-engines.com (birddog dist.) has what you need.......and they DON't sell the HOOT junk gearbox

 

[MotorBicycleRacing]

He's in Australia so your answers probably aren't going to help.

The exhaust bolts for the exhaust are 6mm 1.0

You don't say what kind of 4 stroke you have.
You probably have the 50 cc Huasheng with the tapered shaft and most
of the gearbox choices are junk.

 

[rando24]

He's in Australia so your answers probably aren't going to help.

The exhaust bolts for the exhaust are 6mm 1.0

You don't say what kind of 4 stroke you have.
You probably have the 50 cc Huasheng with the tapered shaft and most
of the gearbox choices are junk.

Sorry for the late reply, yes my 4 stroke is a 50 cc Huasheng but im not sure if it has a tapered shaft, I have found today 1 gear box that is the same as the one that i had on it previously but like you said they are junk and this one is, it didn't last very long on my bike but that's the only one i can find.

 

[siouxindian]

have you thought about getting one of those Q matics made by EZ www.ezmotorbike.com

 

[birdmannn101]

When I used to re-build motorcycles I ran into the same problem with exhaust outlet bolts since both ends are male ends. After a trip to Menards I found a 4 foot long 6mm bolt which I cut to what I needed. If you can't find it at the harware store PM me and I'll send you what I have leftover.

 

[motorpsycho]

if you have a standard happy time 2 stroke, your exhaust flange should have studs in the cylinder, which you would need nuts for, not bolts.
of there are no studs in the cylinder, then you need bolts.

 

[rando24]

When I used to re-build motorcycles I ran into the same problem with exhaust outlet bolts since both ends are male ends. After a trip to Menards I found a 4 foot long 6mm bolt which I cut to what I needed. If you can't find it at the harware store PM me and I'll send you what I have leftover.

Thank you for the offer but i have found some bolts to fit, but thanks anyway.