I heard too many complaints of vibrations on the Predator 212cc and I was tired of 2 cycle engines so I used the 25% off coupon and picked up a new 79cc engine for $75. This is which engine I have on this bike.
It is funny that you guys mentioned that you liked the seat. It is set up to be either a bicycle seat or a chopper seat with 2 different attachments. I bought it off Ebay a few years ago (handmade) for $50 and tried to sell it for $50 on Craigslist and Ebay when I was still riding my 2 stroker but had no takers. So, I posted here on one of the motorbike forums and still had no takers so I put it on my new Huffy bike and ride with it all the time. Pretty comfortable seat.
Dude! That's the Huffy Nel Lusso/Panama Jack frame! They tend to break at the frame welds, so keep an eye on it... maybe with the four-stroke, it won't because of less vibration, but be aware that those frames break when kept in pedal only configuration.
Dude! That's the Huffy Nel Lusso/Panama Jack frame! They tend to break at the frame welds, so keep an eye on it... maybe with the four-stroke, it won't because of less vibration, but be aware that those frames break when kept in pedal only configuration.
Even those who have NOT put a motor on that frame have witnessed fractures of the upper back stays where the rack is welded on- the Cranbrick frame is welded in a jig, then stress-relief tempered in the same jig- that rack was welded on AFTER this treatment, making the areas around those welds brittle! EVEN USED AS A PEDAL BIKE ONLY, THE FRAME IS FRAGILE!
.... fortunately, replacement frames are cheap! Go with a standard frame and bolt on a standard rack.. or weld together bolt-mount fittings on THAT rack after you saw it off THAT frame!