chain replacment?

[miketaco]

so i bust my chain links 1 link to far to put the master link back on i bought a chain off the net(was a motorized bike company) and it was just some old bike chain what should i replace it with or get another master link and link 2 of em or what guys? 415h is the stander size?

http://www.ebay.com/itm/415H-Chain-...ike-/121219300386?hash=item1c393bbc22&vxp=mtr

 

[crassius]

that link looks right in the pic, but it doesn't tell how long it is - 110 links is standard kit size

 

[miketaco]

says 55 links so alot smaller

 

[Slogger]

I just counted the pins/rollers on the picctured chain, it came out as 108, plus the master link.
My bike needed a new chain and it took 104 plus the master, I broke off 4. (40 tooth rear)
I don't know how everyone counts them, but the pictured chain is long enough for normal bikes.

 

[miketaco]

I just counted the pins/rollers on the picctured chain, it came out as 108, plus the master link.
My bike needed a new chain and it took 104 plus the master, I broke off 4. (40 tooth rear)
I don't know how everyone counts them, but the pictured chain is long enough for normal bikes.

i tried to count but kept getting all cross eyed and lost track and count lol i ordered it not knowing how many links.... but if it was too short i would of frakinstein my old chain and new one i have a 32 toof cog now so hopefully this time i wont break a link to far dun dun dun!

 

[Slogger]

I started at the end then just followed the links around and around. Hahaha, being an idiot I'm easily amused.
With only a 32 tooth, I'm betting it's long enough. Put it on the bike, take a measurement, then break it.
Remember the old adage, "I cut it three times and it's still too short!"

 

[miketaco]

I started at the end then just followed the links around and around. Hahaha, being an idiot I'm easily amused.
With only a 32 tooth, I'm betting it's long enough. Put it on the bike, take a measurement, then break it.
Remember the old adage, "I cut it three times and it's still too short!"

ill update and see if i get it right this time