Any one run this pipe?

[45u]

I been looking at this pipe and was wondering the way it is make that it blow exhaust and oil on to the rear tire? Has any one run this exhuast and does it get oil on the rear tire and how does it perform comparison to the stock pipe?
Thanks
Jeff

 

[butre]

it's louder than the stock pipe and performs nearly identically. get a real pipe, don't try to cheap out.

 

[45u]

it's louder than the stock pipe and performs nearly identically. get a real pipe, don't try to cheap out.

Cheap is not in my vocabulary when it comes to any of my rides. You are good at saying what is not good but nothing after. What is a good pipe????? If I was cheap I sure would not be thinking about sending some cylinders to be get nickle sealed like come on the top end racing motorcycles both 4 and 2 stroke. To do one cylinder cost more then a 80cc kit!
Thanks
Jeff

 

[butre]

ideally you'd either build a pipe based on calculations determining optimal exhaust velocity, desired powerband, etc. but adapting a dirt bike pipe works well too. the only ones sold as motorized bicycle expansion chambers that are worth a damn are Arrow's snake pipe and this pipe from MZ Parts Miami ( http://www.ebay.com/itm/MOTORIZED-BICYCLE-BEST-HIGH-PERFORMANCE-RACING-EXHAUST-CHAMBER-/271952212120 )

 

[45u]

The one you have a link to how loud is this pipe as I do not want anything that I will get a ticket for. What pipe are you running? Might build one later as I have all the tools welder and so on but ring now I do not have the time to make one.
Thanks
Jeff

 

[butre]

the pipe I linked is a little loud but that can be mitigated by welding on a muffler. most of the noise these engines make is intake noise, not exhaust, so a good filter is a must for quieting down the motor.

I'm using a homemade pipe tuned for around 6800 rpm

 

[45u]

the pipe I linked is a little loud but that can be mitigated by welding on a muffler. most of the noise these engines make is intake noise, not exhaust, so a good filter is a must for quieting down the motor.

I'm using a homemade pipe tuned for around 6800 rpm

Please post a picture of your exhaust.

 

[butre]

sorry, havent had a working camera in about a month. it's basically a clone of a KTM 50 pipe with a 1.25 inch header and built to fit the bike instead of being a big weird thing in front