I have purchased all NGK spark plugs to NGK five, six, seven. & And I also purchased a E3.22 Which works very well for me also. However I change the spark plug wire on mine I have a regular standard stock CDI, I unscrewed the stock plug wire from the CDI it just unscrews counter-clockwise righty tighty lefty Loosey. Then I got a piece of battery cable from a lawn tractor which is a bit smaller than an automotive cable I wanted the spark plug goes in on the other end there's a metal clip that's opened. I cut a 1-inch piece of the battery cable stripped half of the covering off, Crimped it on to the copper cable(Option to solder it) then I took the insulated side of the wire and aveewed it back into the CDI. Shall I no longer have to remove the nipples off the spark plugs. Better connection! Better wire! I then used a good silicone where I connected it to the CDI left a good job of it on there. Is called the rubber sleeves down on to the wire covering the blob over the CDI.
What do you think about my rig?
WINDY CITY BOB.