Man your clutch plate is filthy clean it and how did you get the clutch arm to swing that far over did not see a cable to it the arm should be parrale to the the edge of your clutch housing something is really out of wack. If its grinding then it most likely mean metal against medal you had your clutch out of position and you burned your clutch pads off and they need to be replace from the picture I would say you don't have them. Take a phillips undue the tiny screw either use needle nose pliars or a screw driver with a small mallet bang the pedal nut reverse remove the the clutch look at it compare your pads with replacement pads on Ebay pictures.