Need info!!

Also download the candit app and look for a group call Motorized bicycle
 
motors are cheap enough to give it a try if you really want to know, but with the metal quality so low, I avoid anything that might make more power and blow out the bottom end
 
Can someone PLEASE help me with this dilemma. Okay, so I just went through roughly 3 tanks of the 16:1 (8oz of oil to one gallon gas) ratio and just now put in 20:1 (6oz of oil to one gallon gas) and it ran fine for about four miles. Then it started to die out. I would pull in the clutch and rev the engine and it would rev. But then started to release the clutch and the motor would bog out. WHY?!!!
 
u mean nos ? not purely but u can inject nos for a boost ive allready got plans and most the bits to do it :p
 
What? No. I'm talking about a 2 stroke motor kit. Why did it work all this times and now, it's dying on me. Is it the idle screw? This thing doesn't push past 25 mph for some reason. It goes even slower on SLIGHT inclined hills. What's causing all these issues? How can I fix it???
 
oh most likely crank seals i expect


if ur carb was set up good bike running well hasnt been touched and is clean it wont be that
and im sure u checked gaskets on head and bottom of chamber but cant thigure it out
yeah most likely those seals would be the first guess
 
I'm lost. How do I check for the gasket? Where is it located? How do I take it out or do whatever it is I'm supposed to?
 
Back
Top