Along with using zip ties on the spokes I wound a piece of around 16ga wire around the line to strengthen it a bit more. Might be overkill but any wea
The clips for the piston were oriented in the wron position. The opening was horizontal, glad I opened it up first.
Stinger motor, has roller bearings at the crank and piston wrist pin instead of bushings. We will see how they preform.
Studs on ther tang cleaned and a coat of JB Weld.
Along with using zip ties on the spokes I wound a piece of around 16ga wire around the line to strengthen it a bit more. Might be overkill but any wea
26" Schwinn Sidewinder, standard mountain bike with a front shock, 21 speed and a steel frame in case I decide to weld anything up in the future.
Lunardog

Along with using zip ties on the spokes I wound a piece of around 16ga wire around the line to strengthen it a bit more. Might be overkill but any wea

There are no comments to display.

Media information

Album
My first build
Added by
Lunardog
Date added
View count
865
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top