Another view of how tight the cabling is at the top.
Its hard to see but the exhaust is tight against the front tube and still will not meet the motor completely flush, guess some heating and bending wil
I plan on using a dremmel to put a slight concave area on this section just to keep it centered and this should allow the engine to drop just a slight
This is how tight I have the front mount after some dremmel work. Still havent figured out the fastening yet and alternate mounts wont work as they wi
Another view of how tight the cabling is at the top.
Spacing on the Schwinn sidewinder is very tight and requires some serious work as you will see in the following pictures. To make space for the carb,f
Stinger motor from bikemotorkit.com. Shipping was very quick from Mich. to Pa. The kit arrived exactly as depicted in their online photo. Packaging wa
Inserting the elbow into the throttle assembly and it cracked.There are a few things I will upgrade once I test run the engine and this will be one of
Lunardog

Another view of how tight the cabling is at the top.

There are no comments to display.

Media information

Album
My first build
Added by
Lunardog
Date added
View count
454
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top