this is the stuff i used.. some pcfire epoxy.. from homedepot.. red and black package.. five bucks.. the half inch copper elbow..two bucks... then a g
T

this is the stuff i used.. some pcfire epoxy.. from homedepot.. red and black package.. five bucks.. the half inch copper elbow..two bucks... then a g

i will have to take some pics during the day and with my real camera and not my phone... i will test drive and post a video so you guys can hear it...
 
yeah it might be flammable but the yellow pipe does not get hot by the time it gets up to the steel wool cuz there is also water in that pvc tube... gonna try a tiny car muffler soon if i find one from a junk yard for cheap..
 
See if you can find a baffler (uses baffles to reduce noise, aka silencer) for a small moped or dirtbike.

Try putting hard rubber blocks between your engine fins to stop high frequency ringing.
 
i used quarter inch pipes from a vaccum line for a car and cut it in pieces and that helped..instead of a hard rubber brick..how do i adjust the motor to idle not so high and it dies while sitting still...yeah when it is idling high it dies
 

Media information

Album
check out the bikes i have built .. A RIDING PACK..
Added by
thine82
Date added
View count
870
Comment count
5
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top