first 10spokes in place. 9 counter clockwise from the valve stem, 1 clock wise, from the other side of the valve stem hole, to the bottom row of spo
tiny jet Cables still need to be reigned in a bit.
temporarary mock up Rear wheel is laced, and pretty true, for such an old rim. the sprocket is in place, tightened, and centered up within 1/16". Eng
ready for 2 inch hole saw. Turns out there are clearance issues with the newly laced bendix hub, so the sprocket will have to be drilled anyway. My
first 10spokes in place. 9 counter clockwise from the valve stem, 1 clock wise, from the other side of the valve stem hole, to the bottom row of spo
10 spokes to go
all spokes into hub
first two spokes These two spokes are on either side of the valve stem. This is how I start lacing, so the spokes don't interfere with airing the ti
R

first 10spokes in place. 9 counter clockwise from the valve stem, 1 clock wise, from the other side of the valve stem hole, to the bottom row of spo

There are no comments to display.

Media information

Album
'46 roadmaster project
Added by
rusty_apache
Date added
View count
406
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top