Here is the motor mount version three. I made two other ones without drilling the frame but both would not align quite right. I finally decided dril
Some grinder work on the fender to get the chain to clear.
First test drive in the parking lot. It started right up in about 10 feet. I have to say I was quite surprised since I have heard some horror storie
another shot of the "finished" product
Here is the motor mount version three. I made two other ones without drilling the frame but both would not align quite right. I finally decided dril
I added a big fuel filter since the gas tank was a bit sketchy. It seems to get big air bubble when I'm almost out of gas tho. I just put a splash i
I forgot I ran out of black electrical tape so I will have to make another trip the the hardware store before the switch is properly mounted.
I capped off the white wire and used a "normally on" switch as a kill on the blue wire. I just removed the stock "normally off" switch for the white
G

Here is the motor mount version three. I made two other ones without drilling the frame but both would not align quite right. I finally decided dril

There are no comments to display.

Media information

Album
my build
Added by
golden_boy
Date added
View count
430
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top