holes prepped I have crammed a 16 penny nailhead into the upper right hole, and ready to tig weld.
extracting tensioner I cut a slit on the end, in order to rotate it. The I ground away the bent part in order to thread it down and out.
tensioner remnant not only is it mangled, but it's bent, so that it only rotates 1/4 turn.
one hole filled There is a little porosity left, but it's shallow enough to fill later. It looks like they started to drill an inch over to the righ
holes prepped I have crammed a 16 penny nailhead into the upper right hole, and ready to tig weld.
'46 roadmaster This bike is pretty much the way I found it. I added the persons saddle and the Wald fenders about 14 years ago. I've always remember
lower legs Another reason I chose this bike, is it has already been bodged up a bit. The holes in the lower legs will be welded up while I'm waiting
'46 roadmonster The front sprocket is also wrong for this bike, and the handlebars and headlight are going as well.
R

holes prepped I have crammed a 16 penny nailhead into the upper right hole, and ready to tig weld.

There are no comments to display.

Media information

Album
'46 roadmaster project
Added by
rusty_apache
Date added
View count
415
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top