I capped off the white wire and used a "normally on" switch as a kill on the blue wire. I just removed the stock "normally off" switch for the white
Here is the motor mount version three. I made two other ones without drilling the frame but both would not align quite right. I finally decided dril
I added a big fuel filter since the gas tank was a bit sketchy. It seems to get big air bubble when I'm almost out of gas tho. I just put a splash i
I forgot I ran out of black electrical tape so I will have to make another trip the the hardware store before the switch is properly mounted.
I capped off the white wire and used a "normally on" switch as a kill on the blue wire. I just removed the stock "normally off" switch for the white
I added an o-ring and a big hose clamp to the carb. The clamp and washer it came with were pretty budget.
finished ride.
here is the kit straight from the box. It even came with some nice Chinese newspaper wrapping.
G

I capped off the white wire and used a "normally on" switch as a kill on the blue wire. I just removed the stock "normally off" switch for the white

There are no comments to display.

Media information

Album
my build
Added by
golden_boy
Date added
View count
490
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top