I covered the form with fleece, but it ended up rough and needed much filling and sanding. I would use fiberglass cloth. It would smooth better and
This the first coat of filler, most of it ended up sanding dust. Several coats, much sanding.
This is after 1 coat of resin and sanding. I used two coats- sanding with 60 grit between.
I used industrial spray adhesive to attach the fleece- but let it completely cure and it will work well. I jumped the gun and the fiberglass resin li
I covered the form with fleece, but it ended up rough and needed much filling and sanding. I would use fiberglass cloth. It would smooth better and
The beginning of my fiberglass tank cover- .25" form core board, cut to shape, the taped together with duct tape- this is mock up with masking tape.
The front leaf spring- formed from flat stock I found in my Dad's barn
The rear leaf spring made from 1.5" flat stock and stays make from .5" tube stock- brazed
H

I covered the form with fleece, but it ended up rough and needed much filling and sanding. I would use fiberglass cloth. It would smooth better and

There are no comments to display.

Media information

Album
HoughMade Cycle Works Build
Added by
HoughMade
Date added
View count
605
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top