The White Wire's Insulation is damaged here, possibly contributing to not working...
I reused the original Black Ground Wire, then soldered a 10 guage Wire in place of the Blue Wire on the top Terminal coming out of the Coil...
We are going to remove the Magneto Loop Coil/Winding and see if we can repair it...
Remove the 4 screws holding the Magneto Cover. Then the 4 screws holding the Magneto Loop to the Motor...
The White Wire's Insulation is damaged here, possibly contributing to not working...
Magneto Loop Coil removed. Next we do away with the White Wire and replace the Blue Wire with a 10 guage Wire. I reused the Black Ground Wire.
Next I carefully soldered the little tiny copper wire on the Top of the Winding/Coil back to the Metal Arm of the Magneto Loop...
Reused heat shield sleeve...
D

The White Wire's Insulation is damaged here, possibly contributing to not working...

There are no comments to display.

Media information

Album
2 Stroke Magneto Coil Loop Repair/Upgrade
Added by
dinoseer
Date added
View count
779
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top