This view shows the brass coil can that conceals the plastic CDI module. I tried to hide or eliminate any plastic where I could. The tool box behind t
Top view showing the carbide lamp and Klaxton style horn. The handlebars will have wooden oak grips.
view showing the chain & pulley throttle system used on early Harleys.
Front view showing the Monark springer fork and handle bar modifications. This was one of the more challenging parts of this project.
This view shows the brass coil can that conceals the plastic CDI module. I tried to hide or eliminate any plastic where I could. The tool box behind t
This was originally a girl’s bike frame. I mounted the motor on the top tube and cut out the rest of the tube that went to the neck. I welded a
I used a stick style clutch that locks in the forward and rear positions. Instead of tightening a belt, it’s linked to a lever on the other sid
Here you can see the clutch arm that transfers the stick movement from the other side to the clutch cable. This view also shows a small unit on the en
09er

This view shows the brass coil can that conceals the plastic CDI module. I tried to hide or eliminate any plastic where I could. The tool box behind t

There are no comments to display.

Media information

Album
First build
Added by
09er
Date added
View count
415
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top