view showing the chain & pulley throttle system used on early Harleys.
It’s in the mockup stage and needs all the finish and paint work. I plan to paint the bike and rims light gray. The rims will be laced with 12
Under the seat is a battery can that would have housed dry cell batteries for the ignition system. Most bikes had a triangular or square can that held
Top view showing the carbide lamp and Klaxton style horn. The handlebars will have wooden oak grips.
view showing the chain & pulley throttle system used on early Harleys.
Front view showing the Monark springer fork and handle bar modifications. This was one of the more challenging parts of this project.
This view shows the brass coil can that conceals the plastic CDI module. I tried to hide or eliminate any plastic where I could. The tool box behind t
This was originally a girl’s bike frame. I mounted the motor on the top tube and cut out the rest of the tube that went to the neck. I welded a
09er

view showing the chain & pulley throttle system used on early Harleys.

There are no comments to display.

Media information

Album
First build
Added by
09er
Date added
View count
436
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top