Cleaning the workbench part 2

I got this motor for a project that fell through I dont have a use for this motor now, This is a New Old Stock Motor
Here is how motor was listed
NOS 5HP BRIGGS ENGINE COMPLETE flat head HEAVY DUTY MODEL MODIFIED FOR MILITARY USE
BRIGGS MODEL132436
DOUBLE BEARING BLOCK ,IC STEEL BORE ,INDUSTRIAL VALVE TRAIN,UPDRAFT CARB,WITH STATOR ,POINTLES IGNITION, MANUAL PULL START,CRANK IS 3/4" X 2 1/4" , 3/16" KEYED AND TAPPED MODIFIED FOR MILITARY USE, WILL ACCEPT ELECTRIC START .

I also obtained a 12 volt elec. starter and it is included with this motor.

I have done a minor eyebrow shave and cleaned up the casting on the intake and exhaust ports. New feelpro gasket set.

325.00 Shipped to Cont. US addresses or make an offer.

Here are a couple pics
5hppic6.jpg


5hppic5.jpg



5hppic4.jpg
 
Last edited:
Here is how this motor would look in a Schwinn Stingray / OCC

Briggschwinn_003.jpg


Its an elec. start and has a stator for lights/ charging battery
 
Back
Top