05 Whizzer Electrical Troubleshoot

Discussion in 'Whizzer Motorized Bicycles' started by go-rebels, Jan 2, 2009.

  1. go-rebels

    go-rebels Member

    I didn't want to piggyback on the "99 Whizzer Electrical Troubleshoot" thread, so I thought I start my own short one.

    Two issues:

    1 - Headlight burned on high beam for a short time, then died. Now I have no low nor high beam. Is my bulb probably bad?

    2 - Turn signals don't work, but all 3 rear lights turn on when ignition is "on". Does this have a separate fuse, or more likely a bad connection or maybe a bad "blinker" module?

    Horn works fine. Brake light works. Battery is freshly charged.
     

  2. bill green

    bill green Member

    howdy check your plug ins behind fork panel they will come loose. Bill
     
  3. go-rebels

    go-rebels Member

    Is the headlight bulb a special unit not available through auto parts stores?
     
  4. Odd-ball headlamp

    Hi GO, yeah the bulb is an availble small motorcycle headlight bulb, it has a flange with holes around the base.

    Mike
     
  5. bill green

    bill green Member

    howdy If you cant find the bulb local you can get from your closest whizzer dealer,,If none in your area you can also get it from whizzer direct 1877-944-9937..Bill
     
  6. KilroyCD

    KilroyCD Active Member

    Go-rebels, what you described there reminds me of an issue I had when installing my turn signals. It was merely a case of having some of the turn signal wires connected to the wrong wires on the harness. It was a simple fix. Do you have the wiring diagram? If not, shoot me your e-mail via private message, and I'll send it to you in the form of a pdf file.
     
Loading...