1947 H MOTOR

Discussion in 'Whizzer Motorized Bicycles' started by eric wolf, Apr 18, 2016.

  1. eric wolf

    eric wolf New Member

    I am rebuilding my H motor and I wondering where I can find the following.
    Engine gaskets?
    Point gap setting.
    Magneto gap setting.
    Valve lash
    Head bolt torque
    Cylinder torque
    Magneto bolt torque.

    Thanks, Eric.
     

  2. mason_man

    mason_man Active Member

    Hi Eric,and welcome.
    The Whizzer Service Facts Book is a must have. You can find one on eBay. Probably contact one of the vendors there as well for the gaskets. If you run into any problems, let me know.

    Ray
     
  3. MotorbikeMike

    MotorbikeMike Member

    Hi Eric, we have begun to make gaskets for Whizzers! Made in USA (California) I hope it does not infringe on any rules here, but you are welcome to email me at rednecktele@gmail.com, and I will provide contact details and any help I can.
    Mike
     
  4. eric wolf

    eric wolf New Member

    I have the bike back together but I cannot get it to run, please confirm that I put the coil cover bolt insulators go between the bolt head and the cover?
    I am getting spark at the end of the plug wire but it is not very strong at the end of the plug, I seem to be getting fuel.
    How many volts, amps and ohms should I have at the end of the plug wire?
     
Loading...