79cc predator engine fitting

Discussion in '4-Stroke Engines' started by BilalCarroll, Jan 1, 2017.

  1. BilalCarroll

    BilalCarroll New Member

    Will the 79cc predator engine fit a 26 inch cruiser or a 29 inch cruiser.
     

  2. darwin

    darwin Well-Known Member

    Cruiser type bikes usually have the most room in the V than others so it should fit. There's no standard size frame so measure and then measure again. Then you'll know for sure.
     
  3. BilalCarroll

    BilalCarroll New Member

    are there any V-frames the predator motor will fit
     
  4. CrazyDan

    CrazyDan Active Member

    Get the measurements make a cardboard cutout and take it to Walmart
     
  5. BilalCarroll

    BilalCarroll New Member

    Thank you!
     
  6. Walmart?
     
  7. CrazyDan

    CrazyDan Active Member

    it's usually closer than most bike shops, good for getting a general idea on the size of bike he needs.
     
  8. ColdCruiser

    ColdCruiser Member

    It will have something to do with the type of mount you use. If necessary you can tap-out the extra oil fill to mount the motor at an angle. I have a preddy 79 in my cruiser but it is a tight fit with the bracket I have.
     
    Tom from Rubicon likes this.
  9. I would like to see a photo of your set-up Cold Cruiser.
     
    ColdCruiser likes this.
  10. KCvale

    KCvale Motorized Bicycle Vendor

    I suggest you read this topic http://KCsBikes.com/topic.asp?TOPIC_ID=639

    You need a big bike to keep the engine level..
    I used a 29" Micargi Fatal Love for my two builds.

    [​IMG]

    [​IMG]

    It comes with just a coaster so put C-brakes front a rear and you have 3 brakes.
     
  11. ColdCruiser

    ColdCruiser Member

Loading...