Anyone Add Engine to Rans Citi, Dynamik or Fusion Bike?
- Thread starter Hive
- Start date
I did a CF (HIve) but was not a Dynamik (Rans) was a plain-Jane, ugly CF Raleigh, but it worked.
Used GEBE Tanaka kit, as only way to go and be certain of running well.), At the time small, quiet 4-cycle engines were not available then. First bike I used Honday 25 and was super but needed power/torque to drive up home-hill. Went to two more rigs
Now am running, small folder (Xootr) which is quiet and complicated but slick in-hub motor, Schwalbe tires...you learn tires are important.
If you are doing a Rans Citi, Dynamik, etc, might have to use longer accerator cable, and custom down tube attachment for engine tongue attachment and maybe a shock fork or seat thingy to offer butt-ease...
Not rocket science though, just need to perservere.
Always remember speed kills and car doors are dangerous.
Used GEBE Tanaka kit, as only way to go and be certain of running well.), At the time small, quiet 4-cycle engines were not available then. First bike I used Honday 25 and was super but needed power/torque to drive up home-hill. Went to two more rigs
Now am running, small folder (Xootr) which is quiet and complicated but slick in-hub motor, Schwalbe tires...you learn tires are important.
If you are doing a Rans Citi, Dynamik, etc, might have to use longer accerator cable, and custom down tube attachment for engine tongue attachment and maybe a shock fork or seat thingy to offer butt-ease...
Not rocket science though, just need to perservere.
Always remember speed kills and car doors are dangerous.
Last edited:
Similar threads
- Locked
