Carby Carb issue

Discussion in '2-Stroke Engines' started by Terry Willoughby, Jan 23, 2016.

  1. Terry Willoughby

    Terry Willoughby New Member

    I have a Tanaka TC 47R. I pulled the carb apart and cleaned it after it sat for awhile. Now when I pull start it raw fuel pumps out the exhaust. Any idea how I can fix this? Thank you.
     

  2. KenM

    KenM Member

    Better check your float! Sounds like it is stuck, and WAY flooded ! Hope this helps. Ken. Keep looking up!
     
  3. Terry Willoughby

    Terry Willoughby New Member

    I'll check it out tomorrow, I have a spare 47 if I need parts. Thank you
     
  4. bikejock

    bikejock Member

    I had this problem on my Chinese 49cc motor a few months back. The carburetors on those Chinese 4 stroke engines aren't designed very well, the float in particular. I know from experience. I ended up swapping it for an NT carburetor from a 2 stroke kit. Don't know if it would work for your Tanaka engine though, but if it uses a 15mm carburetor manifold it might fit with an adapter.
     
Loading...