Ok, the list so far.
Cover Plates Bolts.
5 @ Clutch Cover.
4 @ Magneto Cover.
3 @ Small Drive Sprocket Cover.
2 @ Crankcase on Clutch side.
2 @ Crankcase on Magneto side, at bottom of cylinder.
If you are going to choose Allen key bolts and they got the knurl on the head of the bolt, I used the grinder or the wire brush and smoothed it out.
I would not enlarge the holes in the engine covers, I'd rather make the bolts fit. That's my opinion, but probably a warranty issue if we mess with the engines bolt holes.
If I have missed anything on this, copy and paste the list and fix the list, please.
Next...,
Rear Sprocket
9 @ High Tensile Bolts.
9 @ High Tensile Nuts
9 @ Nylon Lock Nuts
9 @ High Tensile washers ( large )
18 @ High Tensile washers ( small )
OK, I'll try to explain how they fit.
Allen Key Bolt-small washer- to outer side of sprocket
That way the head of the Allen Key bolt has a small washer on the sprocket.
Inner side of sprocket;
Rubber-Plate-Large Washer-Small washer-High Tensile Nut-Nylon Lock Nut.
Next
Carburetor
???????????????
Better air filter or air filter element
I personaly prefer this as a deluxe upgrade kit, a carby with a mixture screw.
Name a carby or carbys to consider. It may be a personal choice, but for the general rider that wants no fuss, generalise a carby for the kit at least.
Remeber, we only have to nut out this Quality Upgrade Kit once.
Next
Chain Tensioner
Tuff call, we all have ideas on this one.
High Tensile bolts,nuts and washers and spring washers for the 2 plates.
The other day there was a bike a the pawnbrokers with these wide chain tensioner wheels with bearings on the pedal side.It had 2 of these wheels, one one the high side of the front sprocket and another on the lower side. Never seen this before but it was on a competition looking Mountain Bike. I will go back there and get some more details, but it looked like a factory standard item, therefore there has to be a replacement part for that particular bike. If it looks Ok and I can test it, then we see if it is a item to consider.
Fetor, it's at Klemzig Cash Convertors or if anyone is close check out.
Next
Cables
Next
???leave it up to some of you guys to fine tune the list.
Thanks