Damaged muffler intake holes?

Discussion in 'General Questions' started by stars, Aug 9, 2014.

  1. stars

    stars Member

    ok the left hole won'r screw in at all. i think the threads is damaged & the right hole will screw in & tight in up. im riding on one screw because the other intake hole will just fall out if i put a screw in. any help or ideals? what to do..
     

    Attached Files:

    Last edited: Aug 9, 2014

  2. dougsr.874

    dougsr.874 Active Member

    6 mm....most hdwe stores will have them....use red locktite.
     
  3. stars

    stars Member

    Hey i just found out my threads inside my Muffler intake hole is stripped!!! when i try to screw a screw in on the left hole it will not screw in & tight in up. im using a m6 10x30 screw but the right hole will screw in & tight in up. im thinking i might need a new cylinder body what do you think?
     
  4. crassius

    crassius Well-Known Member

    best is to heli-coil it, might be OK tapped a tad larger, new cylinder as a last resort

    next time use the muffler hanger that comes with the kit
     
  5. stars

    stars Member

    whats heli coil? explain more because i one side of the intake holes screws in & the other side doesn't.
     
  6. crassius

    crassius Well-Known Member

    best to search the board here for heli-coil or google it
     
  7. stars

    stars Member

    ok i read it & basically a threat repair right? and do you need to drill because i dont have no drill
     
  8. crassius

    crassius Well-Known Member

    you're pretty much stuck then - even the new top end may not work if you don't have a torque wrench

    you may want to look for a repair guy in your area
     
Loading...