Dax Kits as low as $174 bucks !! Wow !!

Discussion in 'Dealer Advertisements' started by thatsdax, Jul 15, 2008.

  1. thatsdax

    thatsdax Guest

    We have the help we need now and are getting caught up !! Whew. We now have our Famous 5 packs posted again allowing buyers to acquire deeper discount on the best engines and kits on the planet backed up by a money back guarantee !!! thanks.. And..Enjoy the ride... go to thatsdax.com to get what you need.

  2. WOW Dwayne
    why the sudden change in price after all these years
    You seemed Pretty consist Until recently.

    Usually prices Go up due to cost An inflation. Lets face it the economy is not doing so well.That's One of the reasons I decide to offer the Kits for the price I have.My Goal is to bring them down To $170 in the next Month or so.

    Good to see your kits drop to a more reasonable price .

    I think we can both agree price gauging at a time like this is just wrong.

    Love the Four strokes I should have them in the next 3 weeks If all goes Well
    Due to the increase In interest with the MB kits There are plenty of Good Folks to Serve for all of us.
    Glade we can both get along .




    if you have any question Feel free to call or email

    or call me at your Convenience

  3. r5579

    r5579 Member

    I'd like the Titan kit. At this point I'm just waiting for it to be back in stock, but to be honest, it's getting hard to hold out for it. :)
  4. thatsdax

    thatsdax Guest

    Well.. I only ..

    I only dropped the price 25 dollars. Not much.. The 5 packs have always been a killer deal. That is not new. Actually.. The prices have been less in the past but when costs go up, I have to raise prices, when costs go down, I like to lower prices and pass it on. So that is the deal.. And deal is what we do !! Enjoy the ride...
  5. augidog

    augidog Banned

    Last edited: Jul 15, 2008
  6. astring

    astring Member

    By 5 pack you mean you have to buy 5 kits to get that price? Also for clarification these are 50 cc's not 48 cc's (AZ requires 48 cc's or less)?
    Last edited: Jul 15, 2008
  7. astring

    astring Member

    Is that $170 to just buy one? Are they 48cc?
  8. crazeehorse

    crazeehorse Member

    just wondering why would you buy 5 kits, to get a good price, when you could buy only one from another vendor, that would give you the same price, for just 1 kit.i have bought a kit from both.looks like, runs like the same.but one vendor went up 50.00, now he's gonna help us out by giving us a better deal, since he is losing orders at the 50.00 price hike. what a guy!i think i will spread the word about what a great guy he is. the waiting time has been reduced to only 2 weeks also. but still who wants to wait 2 weeks for an order to ship,when you can have the same kit within a week? of course if you pay extra, you can go to the front of the line.again what a guy. some of us have run a bussiness for years, know what is going on, you can blow smoke all you want, people watch what you do, not what you say.
  9. thatsdax

    thatsdax Guest

    ok Crazee..

    We have lowered our price 25usd for the singles, and reposted the 5 packs deal, and reduced the lead time for shipping. Even expedite is offered again. These are for DAX motors. And..If you think all these motors are the same, you had better think again. Also..There are plenty of sellers as you say. You are welcome to buy from anyone you choose. Thanks... Sincerely.. Duane..
    Last edited by a moderator: Jul 16, 2008
  10. What is the difference between a "DAX" motor and the other motors out there?
  11. thatsdax

    thatsdax Guest

    Well..Not much really...

    The only differences are the port shapes, port sizes, port timing, bore, stroke, casting, Exhaust Dia, Exhaust Chamber, Clutch lever style and type, Carburetor Dia, Carb Sleeve Dia, Intake runner, Engine Drive sprocket, Clutch hub connection, And rear sprocket style. and... Whew.. These are some of the differences. I am sure I am missing a few.. Just know that each factory has their own take on these motors. And there are many many different factories that make these style engines. They are now being manufactured in Taiwan ROC, Indonesia, India, and many other countries around the world. And yes..They are the same looking style. The original Design came out of Eastern Europe. The General design has been around for decades. And the variations are numerous.

    Actually.. It would be easier to spell out what is the same..
    Spark Plug, CDI, Plug wire and Boot. Right side Dust cover. 415 Drive Chain..

    These are the Items that are not the same but are interchangeable and will work with and in most cases improve the performance of other engines you buy from someone else.
    Magneto, Carb, Exhaust pipe, Engine drive sprocket, Idler wheel ABEC.

    I hope this helps explain.

    I have only bought and tested around 30 different engines from 15 different factories so I have NOT bought and tested them all. I would run out of money and time before I would run out of factories and engines to test. But I feel that I had tested enough to select the factory to produce DAX motors and to know personally they are the best on the planet !! Are there other good engines and factories out there? Yes.. There are ..I know who the are too. I know who buys and sells them too. And they are very good. And..Yes.. I have come across some engines that were only trash can worthy. Sorry to say.. Those too are out there. But you all can do the research and buy from the source you feel and trust the best.. Thanks.. And.. Enjoy the ride...
    Last edited by a moderator: Jul 16, 2008
  12. astring

    astring Member

    If someone were to make frame mount bikes for sale the 5 pack would be a pretty good deal. Still though they are not under 48 cc's so it is not do-able in AZ.
  13. thatsdax

    thatsdax Guest

    O yes..

    The 50cc motors are actually around 45cc. I have seen some 50cc motors with displacement as low as 43 and 42cc's. Again.. Depends on the factory.. also Depends on the style 2 stroke. Thanks..
  14. astring

    astring Member

    If you put a big sticker that said 48 cc's (like Spooky tooth does) on motors shipped to AZ you might help your customers avoid Johnny Law.
  15. crazeehorse

    crazeehorse Member

    i have bought one from you, that looked like a bunch of parts thrown in a box, with no head gasket, & foam melted to the parts & cables. i love the kits, don't get me wrong there. i also sent you an email about a couple of weeks ago about the head gasket, still wating on that reply. now , that's dax, & that sux. for real ,if yours are the greatest on the planet, blue collar bob must get his from outer space, cause,having one of each, he beats you all around. maybe you just figured you send me junk, i don't know , like i said, no answer on phone, no email reply.
  16. thatsdax

    thatsdax Guest

    If that is true..

    We guarantee all our engines and kits. Head gasket missing? Melted parts? What? And. When did this happen? Why is this the first time I have ever heard of such a thing? Outer space is right !! These remarks coming from you are coming from Outer space. I warranty and guarantee all my Engines love them or money back. I have had only 5 warranty returns in the past 12 months.. So let me get this straight.. You get an engine kit from me, Head gasket missing, Parts melted together, and everything else thrown together, and... Then.. Let me guess.. You keep it.. It is all junk, melted, missing parts, thrown together, but what the heck.. I'll just keep it anyway.. I need the Thrown together melted junk.. That is what you are saying.. ok then..Makes perfect sense to me..... Money back guarantee, but what the heck..I will keep it anyway... Yes.. What you are saying makes perfect sense to me... Not....
    Last edited by a moderator: Jul 16, 2008
  17. thatsdax

    thatsdax Guest

    You know who I am

    I do not know who you are to even respond in the room other than the response given. You know who I am it seems. IF what you say is true.. How come I do not know who you are?
  18. crazeehorse

    crazeehorse Member

    i know what i know, you never responded, thats why you don't know me, funny how things can suddenly change when others are watching. anyway i solved all my problems, thanks to the forum, my last post on this subject, not worth arguing about .
  19. thatsdax

    thatsdax Guest

    I know this..

    I respond to all my calls, and all my emails in a prompt and timely manner. What you are doing is pure sophistry,
    convoluted , senseless and with out merit.
  20. thatsdax

    thatsdax Guest

    ok Crazee

    Crazee. I have looked at all 57 posts you have made in this forum since you have become a member. In none of the pictures of your things do I see any Dax Engines, Parts or Equipment. Not one. Not a single one. So.. Crazee. You never bought anything from me, you never called me, you never emailed me.. And that is the truth. Is it not? Which leads me to.. Why? Why would you do this to someone that has never done anything to you? Was it that you wanted to buy from me? But you did not like the lead time ? The price? What? So now you lie about your purchase and problems? Why do this?
    Last edited by a moderator: Jul 16, 2008