T
thatsdax
Guest
Well..Not much really...
The only differences are the port shapes, port sizes, port timing, bore, stroke, casting, Exhaust Dia, Exhaust Chamber, Clutch lever style and type, Carburetor Dia, Carb Sleeve Dia, Intake runner, Engine Drive sprocket, Clutch hub connection, And rear sprocket style. and... Whew.. These are some of the differences. I am sure I am missing a few.. Just know that each factory has their own take on these motors. And there are many many different factories that make these style engines. They are now being manufactured in Taiwan ROC, Indonesia, India, and many other countries around the world. And yes..They are the same looking style. The original Design came out of Eastern Europe. The General design has been around for decades. And the variations are numerous.
Actually.. It would be easier to spell out what is the same..
Spark Plug, CDI, Plug wire and Boot. Right side Dust cover. 415 Drive Chain..
These are the Items that are not the same but are interchangeable and will work with and in most cases improve the performance of other engines you buy from someone else.
Magneto, Carb, Exhaust pipe, Engine drive sprocket, Idler wheel ABEC.
I hope this helps explain.
I have only bought and tested around 30 different engines from 15 different factories so I have NOT bought and tested them all. I would run out of money and time before I would run out of factories and engines to test. But I feel that I had tested enough to select the factory to produce DAX motors and to know personally they are the best on the planet !! Are there other good engines and factories out there? Yes.. There are ..I know who the are too. I know who buys and sells them too. And they are very good. And..Yes.. I have come across some engines that were only trash can worthy. Sorry to say.. Those too are out there. But you all can do the research and buy from the source you feel and trust the best.. Thanks.. And.. Enjoy the ride...
The only differences are the port shapes, port sizes, port timing, bore, stroke, casting, Exhaust Dia, Exhaust Chamber, Clutch lever style and type, Carburetor Dia, Carb Sleeve Dia, Intake runner, Engine Drive sprocket, Clutch hub connection, And rear sprocket style. and... Whew.. These are some of the differences. I am sure I am missing a few.. Just know that each factory has their own take on these motors. And there are many many different factories that make these style engines. They are now being manufactured in Taiwan ROC, Indonesia, India, and many other countries around the world. And yes..They are the same looking style. The original Design came out of Eastern Europe. The General design has been around for decades. And the variations are numerous.
Actually.. It would be easier to spell out what is the same..
Spark Plug, CDI, Plug wire and Boot. Right side Dust cover. 415 Drive Chain..
These are the Items that are not the same but are interchangeable and will work with and in most cases improve the performance of other engines you buy from someone else.
Magneto, Carb, Exhaust pipe, Engine drive sprocket, Idler wheel ABEC.
I hope this helps explain.
I have only bought and tested around 30 different engines from 15 different factories so I have NOT bought and tested them all. I would run out of money and time before I would run out of factories and engines to test. But I feel that I had tested enough to select the factory to produce DAX motors and to know personally they are the best on the planet !! Are there other good engines and factories out there? Yes.. There are ..I know who the are too. I know who buys and sells them too. And they are very good. And..Yes.. I have come across some engines that were only trash can worthy. Sorry to say.. Those too are out there. But you all can do the research and buy from the source you feel and trust the best.. Thanks.. And.. Enjoy the ride...
Last edited by a moderator: