Does anyone know if Hitachi RB24EAP engine work with Roadbug's kit?

Discussion in 'Spare Parts, Tools & Product Developement' started by cateran, Jun 3, 2014.

  1. cateran

    cateran New Member

    It has Tanaka 23.9cc 1.13hp commercial grade two-stroke engine.

  2. darwin

    darwin Well-Known Member

    Google that models specs on Hitachi's site and see if the bolt hole pattern is the same.
  3. cateran

    cateran New Member
    downloaded the manual and parts list from their website. read they. didn't even mention about clutch. So I guess no luck :icon_cry:
    Thanks to darwin though.
    Last edited: Jun 6, 2014
  4. HeadSmess

    HeadSmess Well-Known Member

    blowers dont have clutches ;)

    the flywheel will have the bosses at least, not necessarily drilled and tapped but.

    and of course, the biggest issue is the outer housing where the clutch thingy/shaft etc are usually attached... thats been replaced by half a blower shroud.

    if you get one cheap its a source of spare parts, but as a project engine, youll have to track down the front housing/flywheel cover/shroud thingy. clutch choes. etc. generic engine, should be pretty simple to find ;)

    and still no idea if that is the small or large type clutch until ones in your hand...
  5. cateran

    cateran New Member

    Excellent explanation. Would love to give it a try if I didn't got a Honda from ebay a week ago.