Engine stalling

Discussion in 'General Questions' started by Rockjaw, May 21, 2015.

  1. Rockjaw

    Rockjaw Member

    What is normally the problem with the 2 stroke engines stalling ...just drives and cuts off..is this a carb problem?
     

  2. crassius

    crassius Well-Known Member

    depends on when/how it happens

    cold engine will idle much slower than hot, so if idle is adjusted for hot it may stall when cold (this is more pronounced in newer engines than those with some miles on them)

    coasting downhill with clutch locked out at an idle can stall it due to angle of float
     
    Rockjaw likes this.
  3. Rockjaw

    Rockjaw Member

    yeah and the engine is brand new on this one...just put it on and it stalls
     
  4. The_Aleman

    The_Aleman Active Member

    Make sure the clutch aint draggin and set the idle screw so it idles when it's warm. Chinagirl idle 101. It's really not complicated! :D
     
Loading...