Flooded pressure washer

Discussion in 'Off Topic' started by davidsis, May 28, 2009.

  1. davidsis

    davidsis Guest

    My garage was flooded now my pressure washer does not work. I changed the oil, and drained the gas got it running now the pump only builds up a little pressure then when you pill the trigger it shoots a little water then. stops help.
     

  2. MotoMagz

    MotoMagz Member

    Hi, did ya pull the trigger with the water on and engine off. To let all the air out of the line.Motomagz
     
  3. crazeehorse

    crazeehorse Member

    Try Back Flushing

    take the pressure hose off at the pump, (you may have to rig some type of fitting to hook up a regular water hose.)remove the strainer on the inlet side if it has one , then turn the water on full pressure. you may have to do this a few times. it could have debris, on the inlet side,from the flood water. it's worth a try. this may not work if it has a check valve.
     
Loading...