for sale Grubee 4G for Honda / Honda clone engine

Discussion in 'For Sale' started by recumbentbill, Sep 15, 2010.

  1. For Sale Grubee 4G trans for mounting on the honda or HS142 [honda clone] with 5/8" output shaft. Good shape. 5 to 1 ratio 11T free wheel output drive sprocket. Bushing has been replaced with a true oil lite bushing that works much better than the stock bushing that went bad. One of the 6 little screws that holds the cover on is missing other than that all parts intact. If you live in a hilly area then this setup is for you. It climbs really well with a 48T sprocket.For a faster cruise speed a 44T will work but climbing will be affected. With the 48 cruise speed was 19mph with top speed around 27.Since I used the Grubee HD axle on my bike I will include a never used 56T sprocket and never used rag joint. I'm going back to my grubee stage 111 with intentions of installing a SBP shift kit. . I accept pay pal. PM me if interested
     
    Last edited by a moderator: Sep 15, 2010

  2. occchopperfl

    occchopperfl Member

    Hi Bill,
    Can you please post a pic of the oil lite bushing on the 4g? Im sorry if im bothering u.
    Just in case, what are you asking for the 4g? (you can pm me for the answer)

    Thanks again Bill.
    Respectfully,
    OCCchopperFL
     
  3. oil lite bushing pic

    This 4G oil lite bushing pic is from the grubee site part #33
     

    Attached Files:

    Last edited by a moderator: Sep 16, 2010
  4. oil lite bushing [the one that works]

    Oil lite replacement bushing from Mc Master-Carr


    search my previous posts for dimensions inside diameter and outside
     

    Attached Files:

    Last edited by a moderator: Sep 16, 2010
Loading...